Exhaust fan Vents 100 Quiet T, with low noise level, equipped with a timer with a delay time from 2 to 30 minutes
Application of Vents 100 Quiet T
Innovative exhaust fans in a stylish design with a new level of comfort for bathrooms, showers, kitchens and other household premises.
Maximum air flow combined with low noise levels guarantees an ideal microclimate.
For installation in ventilation shafts or connection to air ducts O100 mm.
Vents 100 Quiet
Technical characteristics of Vents 100 Quiet T – equipped with a pull cord switch
Parameter Value
Voltage 230 V
Current frequency 50 Hz
Power consumption 7.5W
0.008 kW
Productivity 97m3/h
57,133 CFM
26,966 hp
0.02697 m?/s
1619.9 l/m
Current 0.049 A
Rotation frequency
2165 min-1
Noise level at a distance of 3 m - 25 dB(A)
Protection IP 45 class
Pipe size 100 mm
Service life – 40,000 hours
Design of the exhaust fan Vents 100 Quiet T
The body and impeller are made of high-quality and durable plastic that is resistant to ultraviolet radiation.
Thanks to its stylish design, the fan looks good in any modern interior.
The special aerodynamic shape of the mixed-type impeller ensures high air flow and low noise level.
Thanks to its compact design, the fan is ideal for both wall and ceiling mounting.
The shortened branch pipe (81 mm) allows the fan to be installed in a ventilation shaft or connected to an O100 mm air duct.
The fan is equipped with a specially designed check valve to prevent backflow and possible heat loss when the fan is not operating.
The fan outlet is equipped with special air flow straighteners that reduce turbulence, increase air pressure and help reduce noise levels.
The high level of water protection IP 45 makes the fan an ideal solution for bathroom ventilation. The electronic components of the fan are covered with special hermetic covers.
Exhaust Fan Motor Vents 100 Quiet T
Reliable ball bearing motor with minimal power consumption of only 7.5 W.
The bearings are maintenance-free and contain sufficient lubrication for the entire service life of the engine (more than 40,000 hours of continuous operation).
The engine is mounted on rubber vibration-damping inserts to absorb engine vibrations and ensure silent operation of the fan.
The engine is equipped with overheating protection.
Control of the exhaust fan Vents 100 Quiet T
Manual:
The fan is controlled by a room light switch. The switch is not included in the delivery.
The fan is controlled by a built-in pull-cord switch "B". When the fan is mounted on the ceiling, the option is not used.
Speed control can be performed using a thyristor controller (see Electrical Accessories). Fans can be connected in groups of several units to one control device.
Automatic:
Using the electronic control unit BU-1-60 (see Electrical accessories). The control unit is supplied separately.
Using the “T” timer (the built-in adjustable delay timer allows the fan to operate for 2 to 30 minutes after it is stopped by the switch).
Using a humidity sensor and a “TN” timer (if the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and continue to operate until the humidity returns to normal; then the fan operates for the time set on the timer and turns off).
Using a motion sensor and a “TP” timer (if the sensor detects movement in its area of action, the fan will automatically turn on and continue to operate according to the timer from 2 to 30 minutes; the sensor’s area of action is up to 4 meters, viewing angle up to 100°.
Mounting features of the exhaust fan Vents 100 Quiet T
The fan is installed directly into the ventilation shaft opening.
When the ventilation shaft is located remotely, flexible air ducts can be used. The air duct is connected to the fan outlet flange using a clamp.
Attaches to the wall with screws.
Can be used for ceiling mounting.
