Duct centrifugal fan VENTS VKMS 200
Parameter Size
Voltage 230 V
Current 0.84 A
Current frequency 50 Hz
Power consumption 193 W
Pressure - Pa
Maximum air flow 1100 m³/h
Sound pressure level at a distance of 3 m 51 dB(A)
Rotation frequency 2780 min-1
Maximum temperature of transported air -25 +45 oC
Protection IP X4 class
Weight 6.7 kg
Nozzle size 200 mm
High power engine Yes
Low noise performance No
Duct centrifugal fans VENTS VKMS 200
The VENTS VKMS 200 duct centrifugal fan is characterized by a diameter of 200 mm and is designed for the corresponding round ducts of ventilation systems. The unit is suitable for supply and exhaust systems. It can be used to ventilate residential, public, industrial and other premises, but it is necessary to exclude a high level of contamination with dust, fibers and sticky substances.
Housing design
Round duct fans have a round body, made of durable steel, and are also coated with zinc. This coating makes the fan protected from corrosive effects.
Impeller
The impeller is located inside the housing. The blades are curved backwards. The element is installed on the motor shaft and rotates with its help.
Engine
The single-phase asynchronous motor in the design is distinguished by its durable and safe operation, thanks to:
· Protection against possible overheating due to long-term operation;
· Rolling bearings.
Bearings significantly increase the engine service life (about 40 thousand hours). The engine resumes operation automatically after the protection is triggered.
Nutrition
The VENTS VKMS 20 duct centrifugal fan is connected to the power supply network with a cord that is connected using terminals. The terminals are located in a special box on the outside of the casing. The fan kit may also include a cord with a C14 connector (this fan model is marked "P").
Installation
It is possible to install VENTS VKMS 20 duct centrifugal fans in ducts located outside the walls of the room (which is facilitated by the strength of the structure). The axial tilt angle of the fan can be arbitrary (this does not affect the operation of the device in any way, which is a plus).
The standard kit includes mounting brackets that attach the housing to the nearest wall.
Items that can be purchased separately
· Air purification filters;
· Clamps for pipe channels (reducing vibration);
· Speed controllers (smooth or step control).
